A-190-4 is the replacement for module A-190-1 which is no longer
avaiulable. The functions of A-190-1 and A-190-4 are nearly the
same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the
operation of the A-190-4 has been improved because a 3-digit LED
display is available. The current values of all parameters (like
Midi channel, reference note, clock divider) can be read back and
modified by means of up/down buttons. In addition A-190-4 is
equipped with an USB interface and the external +5V supply is no
longer available. Consequently the additional charges for the 5V
adapter fall away.
The module width is the same for A-190-1 and A-190-4. In the
A-100 basic systems the A-190-1 will be replaced by
the A-190-4 from about May 2014.
A detailed description of the module will follow soon.
For more detailed information please look at the user's guide:
Width: 10 TE / 10 HP / 50.5 mm
Depth: 30 mm (measured from the rear side of the front panel)
Current: 200 mA
Note: The supply current fluctuates between about 80 and 200
mA according the number of illuminated segments of the display. 200
mA corresponds to the worst case "888".