Tiptop Audio Zeus Passive Busboard
The ZEUS Passive Bus Board is used to distribute power to
modules coming from either the generation of ZEUS Powered Bus
Board, uZEUS or any other power supply available from other
manufacturers. The Passive Bus Board contain both standard quick
fit terminals as well as screw terminal block for connecting to
power. The quick Fit connect are mounted on the bottom side of the
bus board to provide clean wiring, while the screw terminal blocks
available simultaneously upfront for the most simple and easy
connection to power if needed.
Although called Passive, the ZEUS Passive board can produce up
to 220ma of +5V supply by its own built in regulator, giving you
the confidence that a 5V supply wiil be there in case one of your
new modules requires it.
NOTE: This board does not inferface with Zeus Studio Bus.
for connecting to standard power supplies here
+5V Output: 220mA* max.
Eurorack Connectors: 14.
Analogue Systems Connectors: 5.
Flat Terminal Inputs: 1 set.
Screw Terminal Inputs: 1 set.
Flat Terminal Outputs: 1 set.
*The +5V rail in all ZEUS products feeds from the external power
and does not consume any power from the +12V or -12V rails.