Doepfer A-100LC3 Low Cost Case 3 HE
Doepfer A-100LC3 Low Cost Case, one row with 84 HP for
installation of modules, incl. external Power Supply (1200mA) and
bus board, Dimensions: approx. 445 x 150 x 160 mm (WxHxD)
This is the 3U version of the low cost cases A-100LC6/LC9. The
A-100LC3 is very similar to the A-100LC6 but offers only one row
with 84 HP for installation of modules. A-100LC3 is equipped with
one power supply (1200mA) and one bus board. Because of the limited
space the power suppy of the DIY-Kit #1 with an external
transformer is used (same as for the DIY-Kit #1). At the left side
of the case the connector for the external transformer is located.
The external transformer is not shown in the pictures.
The case is made of raw wood without laquering. The case
can be varnished by the customer in any desired color e.g. by means
of a spray can .
outside: approx. 445 (width) x 160 (depth) x 150 (height)
inside: 1 x 84 HP x 3 U (one bus board), useable depth for A-100
modules: approx. 110 mm (measured from inner side of the front
panel until end of the pc board of the module)
Weight (without modules): about 2.5 kg without external
transformer, about 3.5 kg with external transformer
mains voltage: 115V~ or 230V~ (please specify when you order)
output voltages/current: +12V/1200mA, -12V/1200mA