4ms ROW POWER 40 (black) incl. 90W power adapter!!
4ms row Power 40 Module, with Power Brick 90W and Micky Mouse 230V Power cable included!
The clean and regulated power solution Row Power 40 offers 40W of power, 1.5A@+12V, 1.25A@-12V. It is a good choice for medium systems (e.g. two row each with 104HP width).
The Row Power contains the module and an external power supply and a power distribution (which normally has to be bought separately!)
At the front panel we find two identical 2.1mm barrel sockets: the power supply is connected to one of them, the other one can pass the voltage to another RowPower module by using an separately available "barrel power jumper cable". Both sockets' functions are interchangeable so it doesn't matter which is used as input.
On the back there are two 16-prong pin headers where you connect maximum two passive power distributions (available separately). flexible bus board from 4ms can be connected directly, rigid bus boards have to be connected with a 16-pin flat ribbon cable.
Maximum current provided by the RowPower 40: 1.5A @ +12V, 1.25A @ -12V and 1.5A @ +5V. All voltages are displayed with LEDs. An on/off switch is available.
Two sockets (2.1mm barrel plug, center positive) for external 15-20V DC power supply. It doesn't matter which socket is used as the power input or as the thru.
at the back: two 16-pin headers for connecting bus boards etc.
Power solution with a 3U Eurorack faceplate, 4HP wide, 28mm deep
All extra optional accesoires for the row power: