Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V (eurorack case)

Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V

The A-100LC1V is very similar to the A-100LC3v but offers only 48 HP for installation of modules. A-100LC3v is equipped with the power supply A-100SSB.
The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.
It is also available with black coating :A-100LC1V

Measures in mm:
outside: approx. 262 (width) x 158 (depth) x 154 (height)
inside: 1 x 48 HP (244 mm) x 3 U (one short bus board)
useable depth for A-100 modules: approx. 110/45 mm (measured from inner side of the front panel until end of the pc board of the module), because of the built in power supply the depth is reduced at the right side:

Quantity of bus boards: 1 (short version with 8 module connectors)

Weight: about 1.5 kg (without modules, without mains cable)

Electrical specifications:
mains voltage: 110 ... 240V~ (IEC connector at the rear panel, the mains cable is not included because of the many different versions for different countries)
output voltages/current: +12V/380mA, -12V/380mA, +5V/100mA (the +5V current is taken from the +12V supply, i.e. the sum of the +12V current and the +5V current has to be less than 380mA)

More info at Doepfer site here