MIDI interface

Expert Sleepers FH-1 'faderHost' USB MIDI Host

(latest firmware, version 1.5)

The FH-1 'faderHost' is a USB MIDI Host in an 8HP Eurorack module, allowing you to directly connect a USB MIDI controller to your modular…

Doepfer A-190-3V Black vintage midi interface

Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs…

YARNSMIDI interfaceOverviewYarns is a MIDI interface providing up to 4 channels of CV/Gate conversion, and providing some of the MIDI message processing features of Mutable Instruments’ MIDIpal, including arpeggiator, euclidean…

ES-3 mk4February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:

∙ Illuminated jack sockets
∙ Less deep

IntroductionThe ES-3 is a Eurorack format module which…

Intellijel µMIDI

The µMIDI provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two…

A-190-4 is the replacement for module A-190-1 which is no longer avaiulable. The functions of A-190-1 and A-190-4 are nearly the same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the operation of the A-190-4 has been…

Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs (CV1...4) and one Gate output. A-190-3 is the…

Nog niet leverbaar/ Preliminary!

Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and…

preliminary (not available yet)

Module A-190-8 is a Midi/USB to Sync interface. The main application of the module is the control of clocked A-100 modules like sequencers (A-155), sequencer controllers (A-154), trigger divider…

Module A-192-1 is a CV-to-MIDI interface that converts 16 control voltages in the range 0...+5V into 16 MIDI control change messages. A-192 is the modular version of Pocket Control with the 16 rotary controls replaced by 16…

Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

∙ Gate Input (min. +5V)

∙ CVN Input (defines the Midi note number), 1V/octave standard, range…

The Flame Arpeggiator 20013 is a 2 channel arpeggiator with separate analog outputs for the pitch CV, gate and velocity as well as the sequence clock.
Both arpeggios are also sent to the MIDI out port (channel 1 and 2). The first…

As many other reliable products from Kenton The Modular Solo is a high quality and quick MIDI/CV converter with a lot of functions. But this time it is not a standalone unit but an Eurorack module.

It´s basic setup is similar to…

Vermona Modular qMI 2 – Quad MIDI Interface

Vermona´s second Eurorack module is a very flexible yet affordable MIDI/CV interface which can be up to four voice polyphonic. You can use it as four independent interfaces or in a…

EXPERT SLEEPERS DJ-1000 (MIDI TO 3.5MM ADAPTOR CABLE)