Search results

Doepfer A-100 Bus Board V6 with 22 boxed pin headers with 4 cable

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for…

Doepfer A-100BUS4 Busboard with 4 cables

Doepfer A-100C15: 15 cm (yellow)

with 2 mono plugs 3.5 mm

Doepfer A-100C50T Cable 50cm transparent

Patch cords
50 cm (transparent) with 2 mono plugs 3.5 mm

Doepfer A-100C80T Cable 80cm transparent

Patch cords
80 cm (transparent) with 2 mono plugs 3.5 mm

Doepfer A-100KBK Knob black (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KBL knob blue (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Match your Doepfer Knobs to other systems!

Doepfer A-100KBR knob brown (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KGN knob green (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KMG Knob magenta (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KOR knob orange (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KRD knob red (white stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Match you Doepfer modules to other systems

Doepfer A-100kv (vintage knob, black)

A-100KV, same knob as used in the modules of the Vintage Edition (e.g. A-110-2), black body with 2 white dots and metal disk at the top side

Knob black glossy with silver-metallic coverplate…

Doepfer A-100kv (vintage knob, black) (set of 10 pieces)

A-100KV, same knob as used in the modules of the Vintage Edition (e.g. A-110-2), black body with 2 white dots and metal disk at the top side

Knob black glossy with…

Doepfer A-100KWH Knob white (blackstripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100KYE knob yellow ( black stripe)

Rotary Knobs, diameter 15 mm, height 15 mm, for 6 mm axis with 18 teeth, in different colors

Doepfer A-100LC1 Low Cost Case 3HE/48TE, 100-240V

The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.
The case is made of raw wood…

Doepfer A-100LC1V Low Cost Case Vintage Vers. 100-240V

The A-100LC1V is very similar to the A-100LC3v but offers only 48 HP for installation of modules. A-100LC3v is equipped with the power supply A-100SSB.
The case is made of…

Doepfer A-100LC3v Low Cost Case 3 HE Vintage Edition (black)

One row with 84 HP for installation of modules, incl. external Power Supply (1200mA) and bus board, Dimensions: approx. 445 x 150 x 160 mm (WxHxD)

Same as the A-100LC3…

Doepfer A-100LCBv Low Cost Base with PSU3 Vintage Edition

Two rows with 84 HP for installation of modules

Same as the A-100LCBsw case but painted vintage black like the A-100 Minicase black

The A-100 Low Cost Base has the same…

Doepfer A-100LMBV Low Cost Monster Base PSU3 Vintage Edition

A-100LMBV is the low cost version of the A-100PMB. It comes with black coating: A-100LMBV.

Dimensions and weight:
outside dimensions: ~ 87 (length) x 19 (height) x 38…

Doepfer A-100LMS9v Low Cost Monster Case 9U PSU3 Vintage Ed

A-100LMS9v is the low cost version of the A-100PMS9. It comes with black coating: A-100LMS9V

Dimensions and weight:
outside dimensions: ~ 87 (length) x 42 (height) x 16…

Doepfer A-100PSU2 +/-12V/1200mA 230V (while stock last)

12 V Power supply II

assembled and tested power supply +/-12V@ 1200mA with ring core transformer, 230V version, does not include cables, mains inlet, power switch, fuse and…

Doepfer A-100PSU3 Powersupply

12 V/5V switching supply

Suitable for qualified personnel only because of electrical safety (dangerous mains voltage 100V - 240V)

Dimensions:
ca. 200 x 80 x 40mm12V / 2000mA
-12V / 1200mA
+5V /…

This is the first vactrol based module in the A-100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small light-proof case. For more general details about…

Doepfer A-101-1v Vactrol Multitype Filter (vintage)

This is the first vactrol based module in the A-100 system. A vactrol is a combination of a light depending resistor (LDR) and a LED (light emitting diode) both put into a small…

A-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass and…

A-101-2v is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass…

Doepfer A-101-6 Six Stage Opto FET VCF

A-101-6 is a new filter module that uses so-called opto FETs to control the filter frequency. Opto FETs are very similar to Vactrols but use light depending field effect transistors (FETs)…

Doepfer A-101-8 Photo Phasing

Module A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing…

Doepfer A-101-8V Photo Phasing

Module A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual…

(In Doepfer Bag, no box)

Module A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements resulting in "strange" resonance behaviour and frequency…

Module A-103 is a voltage controlled low pass filter with 18dB/octave slope. The circuit is based on a modified transistor ladder (Moog ladder) and is a reproduction of the legendary TB303 filter.

As for the rest the A-103 is…

A-104 is a fourfold formant filter as used in the Mixtur Trautonium by Oskar Sala. It is made of four parallel resonance filters, each filter can be switched to low pass or band pass or off. Frequency, resonance and level are…

Doepfer A-105-2 24dB SSI Low Pass Filter

Module A-105-2 is a voltage controlled low pass filter with 24dB/octave slope. It is the successor of the A-105 which had to be discontinued because the obsolete SSM2044 filter circuit.…

Doepfer A-105-2V 24dB SSI Low Pass Filter (black)

Module A-105-2 is a voltage controlled low pass filter with 24dB/octave slope. It is the successor of the A-105 which had to be discontinued because the obsolete SSM2044 filter…

Doepfer A-105-4 Quad Poly VCF

A-105-4 is Doepfers first polyphonic filter and contains four identical 24dB Lowpass filters (SSM2044 type). It has available common manual controls and CV inputs with attenuators for these…

(In Doepfer Bag, no box)

Module A-106-1 has it's origin in our experiments to built a MS20 filter clone. The module is not exactly the same as the MS20 filter but similar. The famous original MS20 included two filters: a 12 dB…

Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob…

Doepfer A-106-5 Special Edition

Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.The filter is equipped with a band pass output and a combined low/notch/high pass…

(In Doepfer Bag, no box)

Module A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types (those filters of the A-107 that were available in the…