Doepfer A-127BOM Breakout module for A-127

In addition a breakout module A-127BOM is available. This expansion module offers the following additional functions:

∙ notch filter for each sub-unit
∙ separate outputs for…

ES-5 mk3February 2017 sees the launch of the "ES-5 mk3". Functionally equivalent to the ES-5 mk2, the mk3 adds illuminated jack sockets, and matches the look of the ES-8 and the other Feb'17 updates.

The ES-5 is an expansion…

AUX SEND EXPANDER MODULE FOR THE DUBMIX SERIES MIXER

∙ Connects to the Dubmix via single ribbon cable
∙ Adds two extra VC AUX sends for each of the 4 Dubmix channel strips.
∙ Aux sends are all Post fader.
∙ Clip leds to…

MINI EXPANDER FOR LEVEL CONTROL, DIRECT OUTPUTS AND MASTER SUM ON THE DUBMIX MIXER∙ Adds VC for the 4 channel inputs
∙ Direct outs plus a stereo return jacks allow you to configure your own aux send system using other VCAs…

EXPANDER MODULE FOR THE KORGASMATRON II: ADDS AUXILLIARY INPUTS TO EACH FILTER AND VC OF RESONANCEThe Korgasmatron II Expander module allows for cv control of the q for each filter.

An additional special feature of the…

EXPANDER FOR QUADRA MODULE WITH VC ATTACK DECAY, QUADRATURE MODES, EOC OUTPUTS AND ANALOG OR CIRCUITS.4 x eoc (end of cycle) pulse outputs corresponding to the 4 function generators.
vc of attack and decay (with attenuators) of…

ES-6 mk2February 2017 sees the launch of the "ES-6 mk2". Functionally equivalent to the original ES-6, the mk2 adds these improvements:

∙ Illuminated jack sockets
∙ Less HP
∙ Less deep

Expert Sleepers ES-6 (ES-3…

WMD MME Expansion

The Multimode Envelope Expansion module introduces a number of useful elements including voltage control, trigger outputs, and behavior control.

Expansion Controls and I/O

CV Inputs and Attenuator Knobs -…

WMD SSM Expand

The SSM Expand 8 HP module provides extended functionality of the SSM.

Features

∙ Gate/Trigger Outputs of Each Route
∙ Gates Mirror Routing LEDs
∙ Triggers Occur on Steps
∙ Step Output For CV and…

WMD Synchrodyne Expand

This is the WMD Synchrodyne Expand, we went a little crazy with it. But we figured that if you can grasp the original, you're the type that always wants to go deeper. So lets take this plunge together as we…

Expert Sleepers ESX-8GT Mk3

The ESX-8GT is an expansion module for the ES-4, ES-40 or ES-5, adding 8 on/off outputs for use as gates, triggers, clocks etc. from one expansion header.

The ES-4/5 Controller software (part of…

Expert Sleepers ESX-8MD mk2

The ESX-8MD is an expansion module for the ES-4, ES-40 or ES-5, adding eight MIDI/DINsync outputs from one expansion header.

The ES-4/5 Controller software (part of Expert Sleepers Silent Way) allows…

Expert Sleepers ESX-8CV

The ESX-8CV is an expansion module for the ES-4, ES-40 or ES-5, adding eight CV outputs from one expansion header.

In order to squeeze eight 12 bit channels through one 8 bit connection, the channels are…

Expert Sleepers FHX-1

The FHX-1 is an expansion module for the FH-1 'faderHost' USB MIDI Host Eurorack module.

SpecificationsThe FHX-1's specifications are as follows:

∙ Panel width: 4HP
∙ Module depth: 43mm
∙ Current…

Endorphin.es Gateway

Gateway is an expansion module for Endorphin.es Terminal. Via a set of CV-inputs you get more control over the envelopes of Terminal. Gateway also gives you the possibility to use the Terminal-AD-envelopes as…

Endorphin.es Shuttle Mate

The Shuttle Mate merges MIDI streams from DIN and USB sockets into one MIDI flow which is available simultaneously at a USB and a DIN output socket, making it a perfect companion to Endorphines' Shuttle…

WMD - Arpitecht: Triad

A companion module to the Arpitecht,Triad sends out three static voltages to be used with three oscillators in order to create chords underneath your Arpeggios. Triad connects to the back of the Arpitecht…

Rossum electro-music - Satellite

Universal CV GeneratorSatellite is a compact 12HP module that can be loaded with all (or a subset) of the presets and preset sequences from a Rossum Electro-Music Control Forge or other Satellite…

Intellijel Qx Quadrax Expander

Open up the gatesExpand the functionality of the Quadrax with eight additional gate/trigger outputs.

The Qx expander adds an EOR (End Of Rise) and an EOF (End Of Fall) trigger/gate output to each…

SUPERCRITICAL DEMON CORE EXPANDERExpander for the Demon Core Oscillator.

This module brings polyphonic control to the Demon Core oscillator.

The stacks can be divided between up to 16 polyphonic voices via MIDI or four 1V/oct…

WMD - Axxent

AXXENT is an expander module for the METRON trigger and gate sequencer and adds 16 "accent" gate outputs. Each track is specifically tied to METRON tracks, making it a very intuitive addition to any METRON sequencing…

ALM017-EX1: PNW Expander 1 (4HP)

Extend Pam as a master to clock external gear with a super solid MIDI & Din Sync dedicated clock outputs.

Use extra fixed jack clocked gate outputs to free up Pamela outputs for more exotic…

ALM017-EX2: PNW Expander 2, 2HP)

∙ PEXP-2 Features:
∙ 3.5mm jack socketed MIDI Clock output
∙ MIDI wiring orientation switchable (for differing 3.5mm wiring setups)
∙ Buffered x24 & run jack outputs
∙ Skiff…