The D.S.G provides three ‘DIN Sync’ connectors with their clock and run signals split into separate jack connectors.
This allows for easy connectivity and synchronization of DIN Sync based devices with supporting Eurorack…

The ‘S.B.G’ is a compact utility module intended for the interfacing of guitar effect pedals with your eurorack modular system.

It provides both attenuation and amplification of audio signals for level matching together with…

Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.
The pre-amp has two inputs: an…

Module A-138d can be used in two different ways:

∙ as a crossfader module within the A-100

∙ as an insert module for external effect units (e.g. guitar stomp boxes) with dry/wet control

If the module is used as a crossfader…

Doepfer A-139-2 Headphone Amplifier 2

∙ two-channel headphone amplifier

∙ two audio inputs with level controls

∙ Input 1 is normalled to Input 2

∙ common loudness/master level control

∙ headphone output (stereo 1/4"…

Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a filter or the loudness can be controlled by a foot…

Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic.

For more detailed information please look at the English user's guide: A181_man.pdf

Width:…

Active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). Miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate…

ES-3 mk4February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:

∙ Illuminated jack sockets
∙ Less deep

IntroductionThe ES-3 is a Eurorack format module which…

AUDIO INTERFACE IIDUAL BALANCED PRO LINE LEVEL INPUT TO EURORACK LEVEL SHIFTER / DUAL EURORACK LEVEL TO BALANCED PRO LINE LEVEL OUPUT SHIFTERThis module allows you to interface your Eurorack modular system to the pro balanced line…

HEADPHONE AND STEREO LINE OUTA very handy module for directly monitoring your system with headphones and as a convenient line level output to connect to amplifiers or recording devices.

The headphone amp is low noise and capable…

Make Noise Rosie

Disco-Style cue-system w/ FX loop

RosieRosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system. It is designed to facilitate live performance on the…

Noise Engineering Adigo Metric (AM)

Front panel voltage meter for monitoring system health. Also provides bi-directional access to the CV and Gate bus along with LED monitoring of the busses.

Size: 8HP Eurorack
Depth: 1…

Verbos Electronics Scan & Pan

The Verbos Electronics systems need a small mixer module. One option would be to make it very simple with the focus on size. Mark Verbos decided it should do more.

The Pan & Scan (or Scan & Pan) is…

The TAI-4 by Vermona is a 2x2 channel audio interface module for balancing signals coming from the modular system and for un-balancing audio signals that are sent to the modular.

Unlike other modules of that kind that work with…

QUAD INPUT STEREO VC MIXERThe DUBMIX is the main module in the series that also includes the DUBMIX AUX expander, and DUBMIX MINI expander.

This mixer is low noise, low bleed with clickless muting and fast clean VCAs. All the…

WMD Pro Output

The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps…

Vermona Modular twinOut

Beside spectacular sound-engines and -shapers, conventional and uncommon sources and modulators of control voltages, a modular synthesizer also needs a choice of modules to handle the daily routine.…

Mutable Instruments - Ears

Ears is MI's take on Tom Whitwell’s Mikrophonie module – a contact microphone and amplifier allowing you to generate a large palette of sounds by scratching, tapping, and more generally collecting…

Expert Sleepers ES-8 USB audio interface (announced for february 2017))

he ES-8 is a USB 2.0 class-compliant audio interface in a Eurorack module, with DC-coupled inputs and outputs that can be used for both CVs and audio. As…

ES-6 mk2February 2017 sees the launch of the "ES-6 mk2". Functionally equivalent to the original ES-6, the mk2 adds these improvements:

∙ Illuminated jack sockets
∙ Less HP
∙ Less deep

Expert Sleepers ES-6 (ES-3…

Expert Sleepers ES-40

The ES-40 is a Eurorack format module which converts a standard S/PDIF input to five channels of expansion headers, which are used in conjunction with the Expert Sleepers ESX range of expanders (currently…

Expert Sleepers ESX-8GT Mk3

The ESX-8GT is an expansion module for the ES-4, ES-40 or ES-5, adding 8 on/off outputs for use as gates, triggers, clocks etc. from one expansion header.

The ES-4/5 Controller software (part of…

Expert Sleepers ESX-8MD mk2

The ESX-8MD is an expansion module for the ES-4, ES-40 or ES-5, adding eight MIDI/DINsync outputs from one expansion header.

The ES-4/5 Controller software (part of Expert Sleepers Silent Way) allows…

Endorphin.es Cockpit

The Cockpit is a performance mixer with 4 stereo channels, two channels of send and return to use iOS devices for signal processing (via a 4-pin TRRS cable).

The module also has an on-board compressor with…

Intellijel Headphones 1U

HEAPHONE AND STEREO OUTPUTHigh quality headphone amp capable of driving consumer and studio grade heaphones with excellent bass response and loud levels.

This module can also be used as a line level…

Intellijel Line Out 1U

EURORACK LEVEL TO BALANCED PRO LINE LEVEL OUPUT SHIFTER IN 1UThis module allows you to interface your Eurorack modular system to the pro balanced line level world (+4 dBu). You can send audio out to rack…

Module A-135-4C is a four-fold envelope follower with ajustable attack and release time for each channel. The main function of the module is to derive four envelopes from the A-135-4A audio input signals. These voltages can be…

Expert Sleepers Disting MIDI Breakout

4HP passive module to connect to the ES Disting.

MIDI I/O

IntroductionThe disting mk4 has a pair of industry standard MIDI ports - one input, one output - which can be used to connect to a…

ALM019 H.P.O.

The ‘HPO’ is an affordable super slim and skiff friendly no frills stereo headphone driver output for your modular synthesiser. Includes a volume control and ability to double up a mono signal into stereo. A…

ReBach - CATCH STV (S-trigger converter)

Conn

∙ Eurorack S trigger converter.
∙ Convert S trigger to V trigger or V trigger to S trigger.
∙ S-trigger is used by Moog, Korg and Yamaha synthesizers.
∙ skiff-friendly.
∙…

Grp Synthesizer - Output Module

Four Channel Output Mixer
Ins 1,4 freely pannable L-R
Ins 2,3 hard pannedl full L-R
Stereo Main Out w sep Levels and Vu-Meters.
Two Phones Out with adjustable Volume
Panel Width: 16 HP
+12V =…

Qu-Bit Electronix - Mixology (black)

Mixology takes the mixing and routing of modular audio signals to a new level of sophistication. It is a stereo, four channel mixer with a performance oriented interface. Each channel has a…

Doepfer A-197-3 RGB LED Controller

Module A-197-3 is a control unit for RGB LED stripes.

The LED stripe is glued e.g. to the inner edges of the cases A-100P6/P9/PMS6/PMS9/PMS12 to illuminate the modules and patching statically…

Make Noise XOH

The XOH (miX Out Headphone) music synthesizer module is a stereo mixer, headphone amplifier and output interfacing module for your modular synthesizer. It consists of two stereo input channels with independent…

Intellijel Duatt 1U

Dual Attenuator / Inverter / Attenuverter / Multiplier / Mixer / DC Voltage Source

Half a Quadratt (and a little bit more)A super compact Dual Attenuator, Inverter, Attenuverter, Multiplier, Mixer and DC…

Intellijel Stereo Line Out 1U

Stereo Balanced Line Audio Output

Mono/Stereo audio from your Modular to Stereo Balanced Line Level Outputs.

Use the Stereo Line Out 1U system to send audio from your modular synth into power…

Intellijel Stereo Line Out Jacks 1U

1/4" TRS Jack panel for the Stereo Line Out 1U module

Stereo Out Jacks 1U Module

If you don’t own an Intellijel case with built-in compatible ¼” jacks, then you need to purchase a Stereo…

ALM017-EX1: PNW Expander 1 (4HP)

Extend Pam as a master to clock external gear with a super solid MIDI & Din Sync dedicated clock outputs.

Use extra fixed jack clocked gate outputs to free up Pamela outputs for more exotic…

ALM017-EX2: PNW Expander 2, 2HP)

∙ PEXP-2 Features:
∙ 3.5mm jack socketed MIDI Clock output
∙ MIDI wiring orientation switchable (for differing 3.5mm wiring setups)
∙ Buffered x24 & run jack outputs
∙ Skiff…

Endorphin.es BLCK Shuttle Control (Black)

Shuttle Control is a 16-channel MIDI/CV interface which can recieve USB-MIDI at a number of inputs simultaneously. For instance control signals from a tablet/PC/Mac at the "to device…

DOEPFER A-119V EXTERNAL INPUT / ENVELOPE FOLLOWER VINTAGEModule A-119V (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope…