Mixer

Intellijel - Dubmix + Mini exp. + Aux exp.

Complete set with 3 modules for a special price.

More info:

Intellijel Dubmix

Intellijel Dubmix Aux Expander

Intellijel Dubmix Mini Expander

4ms VCA Matrix (VCAM)

The VCA Matrix from 4ms is a playable 4x4 matrix of 16 VCAs.
Four CV or audio inputs can be routed in any amount/combination to four outputs, using the 16 CV control jacks, Level knobs, and Mute…

Doepfer A-138sv Mini Stereo Mixer (vintage black)

A-138s is a simple but useful 4-in-2 mixing tool.

It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute…

GR61 MIX

∙ Eurorack 3ch mixer
∙ Applicable for audio and CV signals ( DC coupled )
∙ 3 input level controllers. 1 output sum controller
∙ skiff-friendly
∙ Size: HP8 (W40.64mm H128.5mm D26mm)
∙ EAN code:…

Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the…

Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the…

Doepfer A-138bV Vintage black edition

Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the…

Module A-138c is a four channel mixer, that allows to add or to subtract four incoming voltages to the output signal. In the middle position of the corresponding control the amplification is zero. Turning the knob counterclockwise…

Module A-138d can be used in two different ways:

∙ as a crossfader module within the A-100

∙ as an insert module for external effect units (e.g. guitar stomp boxes) with dry/wet control

If the module is used as a crossfader…

Module A-138e contains four identical units that can be used for different crossfading, mixing and polarizing applications:

∙ Polarizer: only input A is used, inputs B and C are unconnected. In this case the sub-unit works as a…

Module A-138m is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the…

Doepfer A-138s Mini Stereo Mixer

A-138s is a simple but useful 4-in-2 mixing tool.

It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control that is used to distribute the signal to…

Module A-138u is a simple, low-cost mixer with two units. Each unit is equipped with three inputs and one output. The upper unit has for each input a trimming potentiometer available that allows to adjust the amplification in the…

Doepfer A-138p Performance Mixer Input

The A-138p input module of the Performance Mixer system has four channels featuring controls for gain, aux send, panorama and output level as well as a mute switch and a peak-LED for the…

Doepfer A-138o Performance Mixer Output

The output module of the Performance Mixer system sums all conencted input modules and their channels, controls the final volume as well as separately the aux send and aux return levels…

2hp - Mix

Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Download the Mix manual here

∙ DC coupled for audio…

WMD Performance Mixer

A game changing mixer for live performance within the Eurorack modular synth ecosystem.

Expansion modules:

- PM Mutes

- PM Channels

- PM DB25 Pre Outs

The Performance Mixer is an 8 channel audio mixer…

WMD PM Channels

Adds two more stereo channels to the WMD Performance Mixer.

- Two sets of inputs for each stereo channel that can be selected or summed via the 3-way toggle switch.

- More than 30dB of gain over each channel…

WMD PM Mutes

Expander module for the WMD Performance Mixer.

This module gives you mute control over each channel of the Perfomance Mixer including the master Aux Sends and even the two extra stereo channels provided by the PM…

Intellijel Mixup

Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level…

HEX LINEAR VCA AND 5:1 VC MIXERLinix is the successor to the now discontinued HexVCA module. It comprises six high quality 2164 based linear VCA circuits with CV attenuation and BIAS control for each channel.

The first five…

Verbos Electronics Scan & Pan

The Verbos Electronics systems need a small mixer module. One option would be to make it very simple with the focus on size. Mark Verbos decided it should do more.

The Pan & Scan (or Scan & Pan) is…

Doepfer A-138pv Performance mixer (black vintage)

The A-138p input module of the Performance Mixer system has four channels featuring controls for gain, aux send, panorama and output level as well as a mute switch and a peak-LED…

Doepfer A-138ov (output module) Vintage black

The output module of the Performance Mixer system sums all conencted input modules and their channels, controls the final volume as well as separately the aux send and aux return…

Make Noise Rosie

Disco-Style cue-system w/ FX loop

RosieRosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system. It is designed to facilitate live performance on the…

2hp - Mix - black

Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Download the Mix manual here

∙ DC coupled…

Koma Elektronik - Poltergeist - Quadraphonic VCA / Audio Mixer

For your Quadraphonic live audio performance! Let the sound come from every corner of the hall!

KOMA Elektronik’s new POLTERGEIST Eurorack module enables users to…

QUAD INPUT STEREO VC MIXERThe DUBMIX is the main module in the series that also includes the DUBMIX AUX expander, and DUBMIX MINI expander.

This mixer is low noise, low bleed with clickless muting and fast clean VCAs. All the…

AUX SEND EXPANDER MODULE FOR THE DUBMIX SERIES MIXER

∙ Connects to the Dubmix via single ribbon cable
∙ Adds two extra VC AUX sends for each of the 4 Dubmix channel strips.
∙ Aux sends are all Post fader.
∙ Clip leds to…

MINI EXPANDER FOR LEVEL CONTROL, DIRECT OUTPUTS AND MASTER SUM ON THE DUBMIX MIXER∙ Adds VC for the 4 channel inputs
∙ Direct outs plus a stereo return jacks allow you to configure your own aux send system using other VCAs…

6 CHANNEL CV/AUDIO MIXER WITH 3 BUS OUTPUTS AND FULL DIGITAL CONTROL OF MUTING PATTERNS∙ skiff friendly
∙ 6 led linear sliders for input attenuation control (leds can be easily replaced with other colors, they just slide…

This has to be one of the most fun modules we have ever played with! With just a few audio and CV sources and some inter dependencies (i.e use the Joystick CV to simultaneously modify the signals being processed by the VCAs) you…

RIPLE ATTENUATOR, INVERTER, ATTENUVERTER AND DC VOLTAGE SOURCEThis is a utility module we found ourselves always needing and using. The three well spaced knobs can act as active attenuators, attenuverters (bipolar) and inverting…

DUAL 3:1 / 6:1 UNITY GAIN MIXER (FOR CV OR AUDIO) IN 2HPDual 3:1 audio and cv mixer (up to three buffered inputs with a single buffered output).

Features:

∙ Output of top mixer is normalled to the bottom mixer to give a 6:1…

Make Noise modDemix

New version of the modDemix.(July 2014)

Differerences from the original:

"The modDemix will return to stock with subtle changes that make the module more intuitive and more useful. The faceplate graphics…

Make Noise Teleplexer

Telegraph Style signal multiplexer.

The Teleplexer is a telegraph style multiplexer (signal router) that applies the fast, physically immediate techniques of telegraphy to playing the modular synthesizer.…

FRAMESMixer/keyframerOverviewThe heart of Frames is a 4-channel analog VCA under tight digital control. Through flexible input/output mixing and normalling options, it can be patched to serve the following purposes (among…

Multiples and mixing utilitiesLinks provides 3 utility functions focused on signal distribution and mixing.

1:3 is a 3-output buffered multiple, with an offset error < 0.1%. It is useful for distributing the voltage from a CV…

Mutable Instruments Shades

Mixer, offset, attenuverterOverviewShades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

A bicolor LED monitors the polarity and…

WMD Invert Offset

The 6 HP Invert Offset module creates an easy way to modify control voltages for other modules in your system.

The Invert Offset consists of two identical channels. Signal applied to the In jack is vertically…

WMD MultiMode VCA

The WMD MultiMode VCA is designed to be the most versatile amplifier in your modular. Period.

The MMVCA is capable of a number of useful configurations utilizing both VCAs, or as two seperate
amplifiers. It has…

WMD Quad Anti Aliasing Filter (QAAF)

he WMD Quad Anti Aliasing Filter (QAAF) was conceptualized as the first expansion for the Phase Displacement Oscillator.

It is designed to eliminate aliasing and stair-step distortion from…

WMD Triple Bipolar VCA

Intoducing the WMD Triple Bipolar VCA, the input side expansion for our Phase Displacement Oscillator. This module provides dedicated inverting/polarizing/bipolar amplitude modulating inputs normaled to the…

WMD/SSF Blender

BLENDER is a four channel mixer and voltage controlled cross-fader. BLENDER simplies mixing audio and control voltages (CV) by incorporating a single control to blend two signals at a time - also known as a…

WMD/SSF Scale - Polarize - Offset (S.P.O)

S.P.O. is a polarizing scaler and offset generator.

Up to two inputs can be summed into a single scaler/offset generator.

The offset generator provides a DC voltage source for shifting…

WMD/SSF TOOL-BOX

TOOL-BOX is a collection of six useful synthesizer utilities.

This module includes a two input voltage summing section, a signal rectifier, bipolar comparator, analog OR (maximum), an inverter and a voltage…

Endorphin.es Terminal

Terminal combines a loopable dual AD envelope with a low pass gate and a digital reverb/ech unit one module.

Sections airplane A and B feature two identical, voltage controlled function generators with…

Endorphin.es Cockpit

The Cockpit is a performance mixer with 4 stereo channels, two channels of send and return to use iOS devices for signal processing (via a 4-pin TRRS cable).

The module also has an on-board compressor with…

Doepfer A-135-4A/B VC Performance Mixer

Series A-135-4 contains several modules which are used to built a voltage controlled performance mixer. The modules of the A-135-4 series can be combined with the (non voltage controlled)…

Module A-135-4C is a four-fold envelope follower with ajustable attack and release time for each channel. The main function of the module is to derive four envelopes from the A-135-4A audio input signals. These voltages can be…

Eowave Sommateur x6, black

Very compact 6-into-1 audio mixer with linear pots.

4 HP

Eowave Fluctuations Magnètiques, Quad Multimode Filter, black

The Fluctuations Magnétiques combines 4 independent multi-mode filters with selectable low-pass, band-pass ?& hi-pass. Each filter can be synced to one another to…

ACL - Gate Mix Gated Channel Mixer

Width 12 HP

Audiophile Circuits League-GATE MIX is a 4 channel Audio signal mixer, consisting two 2-in-1 mixers (1+2 & 3+4), whose outputs are summed together to the master output. All 4…

ALM009 Tangle Quartet - Quad lineair VCA and mixer

‘Tangle Quartet’ is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a…

Tiptop Audio - MIX7 Analog Summing Mixer

MIX7 is a seven channel analog summing mixer module for Eurorack. It is designed for summing any of the different types of signals you’ll find in a modular system: Audio, CV, Triggers,…