FLAME QSLIDER QUAD CONTROL VOLTAGE SOURCEThe QSlider is an analog CV source with four 60 mm faders.

The control range of the four sliders can be set with two min/max controls.
The Min control sets the output voltage at zero…

FLAME JOYSTICK REKORDERSmall compact joystick module with recording function.

The module can record the joystick movement to a length of about one minute. The sequence remains stored in the battery-backed RAM after switching off.…

FLAME X-4 QUAD VC/ENVELOPEThe FLAME "X-4" is a compact multifunctional 4x Envelope / VCA module, which combines in a very small space (10HP) 4 AR envelopes and 4 separate VCAs.
The module complements quad VCOs (eg the FLAME…

Flame Quad CV Recorder

Four-channel recorder/looper for recording and playing back control voltages or potentiometer movements in a very wide frequency range, from very slow to fast. The output is a smoothed voltage without…

Flame Chord Machine 2

The "Chord machine 2" euro module is a combination of chord generator, arpeggiator, quantizer and generates maximum four part chords within a range of maximum 8 octaves. To your disposal are 42 preset chords…

Flame MemoSlider

The Flame "MEMOSLIDER” module is a small programmable analogue slider module, designed for small mobile euro racks.

There are three play modes.
SLIDER: for manually selection of one of the eight steps
SAMPLE…

Flame Dual Key (Trigger Shaper)

The Flame "DUALKEY” module is a small pingable trigger envelope module, designed for small mobile euro racks.

There are two channels with following functions:

SHAPE: voltage controllable…

The Flame Arpeggiator 20013 is a 2 channel arpeggiator with separate analog outputs for the pitch CV, gate and velocity as well as the sequence clock.
Both arpeggios are also sent to the MIDI out port (channel 1 and 2). The first…

Flame 4 VOX

The 4Vox is a quad wavetable oscillator with up to four voices per VCO channel, resulting
in a maximum of 16 voices at four individual outputs. Due to a MIDI input the module can
be played both with CVs or/and…

Flame FX16-CV Effect Module

The Flame "FX16-CV” module is a small low cost DSP-based (Spin semiconductors FV-1, 24bit ADC/DAC) multi effect module, designed for small mobile euro racks. 16 different multi effect programs are…

M3 Nylon Washers to protect your modules from screw scratches.

Bag with 20 pieces

Bag with 20 M3x6 Silver screws for mounting your modules

FLAME C-3 MKII KNOB REKORDERThe FLAME "C-3 MK2" is a three-channel module for recording and playing back movements of controllers.
Those can be recorded with each channel´s individual knob. The movements will be output as control…

FLAME MäANDERFour-voice desktop synthesizer and filter bank.

Features:

∙ 4-voice synthesizer with dynamically controllable 12-channel analog filter bank
∙ Live sequencer with 12 filter channel tracks and polyphonic note…

Flame "AUTOMIX" Mixrekorder

The "AUTOMIX" module is a compact three-channel mixer for audio or CV sources in the voltage range +-5v (audio modular level).
The mix level of each track can be adjusted and recorded with the track…

Flame "CROSSMIX" Dual Crossfader Rekorder

The "CROSSMIX" module contains two independent crossfaders with two inputs to one output and is designed for audio or CV sources in the voltage range +-5v (Audio Modular Level).
In…