Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch.
It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the trigger input socket,…

Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analog shift register too. The active in/output is displayed by a LED. The…

Module A-182-1 is a simple passive multi-connector similar to the multiples module A-180. In contrast to module A-180 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal…

Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from…

Noise Engineering Variatic Basicus (VB)

Variatic Basicus is six momentary switches debounced for drivng gates. It is a simple useful gate control surface for eurorack.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x8 Eurorack
Draw…

Verbos Electronics Scan & Pan

The Verbos Electronics systems need a small mixer module. One option would be to make it very simple with the focus on size. Mark Verbos decided it should do more.

The Pan & Scan (or Scan & Pan) is…

WMD Sequential Switch Matrix

Introducing the WMD Sequential Switch Matrix: Their take on an essential module.

Four inputs can be routed with individual buttons to four outputs. Those routing settings are stored in an array of…

WMD SSM Expand

The SSM Expand 8 HP module provides extended functionality of the SSM.

Features

∙ Gate/Trigger Outputs of Each Route
∙ Gates Mirror Routing LEDs
∙ Triggers Occur on Steps
∙ Step Output For CV and…

WMD/SSF TOOL-BOX

TOOL-BOX is a collection of six useful synthesizer utilities.

This module includes a two input voltage summing section, a signal rectifier, bipolar comparator, analog OR (maximum), an inverter and a voltage…

2hp - 3:1

3:1 is a voltage controlled switch. It allows the user to send one of three input signals to a single output.

Control over the active input allows the user to craft unique rhythmic events from existing gates and clocks…

Module A-151V Vintage black (Quad Sequential Switch) is like an electronic four-position rotary switch.
It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received at the…

Module A-150V Vintage black (Dual VCS) contains two separate voltage-controlled switches.

Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in both…

ALM007 Boss Bow Tie - 8 way voltage controlled switch

‘Boss Bow Tie’ is an 8 way bidirectional voltage controlled switch. An input ‘I/O’ signal is mapped to an output ‘I/O’ via a corresponding control voltage. As…

SPUTNIK – 5 STEP VOLTAGE SOURCE (SHAFT KNOBS!)Knobs see picture.

Pulser Control:

∙ “Trig. In” to trigger Pulser
∙ “Pulser” controls rate of pulses fired between .002 and 10 sec and the amount of pulses can be…