Doepfer A-160 Clock/Trigger Divider
Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
For more detailed information please look at the English user's manual: A160_man.pdf
A-152 Voltage Addressed Track&Hold / Switch (Multiplexer) / Digital Outputs
A-161 Clock/Trigger Sequencer
Width: 4 TE / 4 HP / 20.0 mm
Depth: 40 mm
Current: 40 mA