Tiptop Audio Zeus Passive Busboard
The ZEUS Passive Bus Board is used to distribute power to modules coming from either the generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick Fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.
Although called Passive, the ZEUS Passive board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply wiil be there in case one of your new modules requires it.
NOTE: This board does not inferface with Zeus Studio Bus.
A guide for connecting to standard power supplies here
+5V Output: 220mA* max.
Eurorack Connectors: 14.
Analogue Systems Connectors: 5.
Flat Terminal Inputs: 1 set.
Screw Terminal Inputs: 1 set.
Flat Terminal Outputs: 1 set.
*The +5V rail in all ZEUS products feeds from the external power supply
and does not consume any power from the +12V or -12V rails.